Bangalore's Trusted Solar Partner

Heat Pump Water Heater Installation in Bangalore

A.O. Smith & Havells authorised installer. 70% cheaper than electric geysers. Residential to industrial — 80L to 84kW. Bangalore's mild climate means year-round peak efficiency.

✦ See your savings in 10 seconds

My monthly bill is ₹

500+ Bangalore families already switched. Free site assessment within 48 hours.

500+ Installations

12MW Installed

₹10Cr Saved

BESCOM Empanelled

A heat pump water heater extracts warmth from ambient air to heat water — consuming 3–4× less electricity than a conventional electric geyser. In Bangalore's mild climate (average 20–35°C year-round), heat pumps operate at peak efficiency throughout all seasons, making them one of the most cost-effective hot water solutions available. Pratham Solar is an authorised installer for A.O. Smith and Havells heat pump water heaters in Bangalore, serving residential, commercial, and industrial customers.

Brands We Install

A.O. Smith

Manufacturing plant at Harohalli, Kanakapura — 30km from our Gubbalala office

Residential Range

HPW 80 80L

2–3 member families

Entry-level residential, compact footprint

HPI 40 / HPI 50 150L / 180L

4–5 member families

Mid-range residential, digital controls

Mid-Commercial Range (Hostels, Clinics, Small Hotels)

HPA 80 / HPA 120 300L / 450L

50–80 person hostels, clinics

Air-to-water heat pump, stainless tank

CAHP 80-06 / 120-06 300L / 455L

Small hotels, PG accommodation

1.5 DI Series with digital inverter compressor

Large Commercial & Industrial

CAHP 3HP

455L

Heavy commercial

CAHP-MC-19 / 38

19kW / 38kW

Hotels, hospitals — flow-through, no storage

CAHP-HC-42 / 84

42kW / 84kW

Large hotels, factories, industrial

Havells

AHP Series — BEE 5-star rated, built for Indian conditions

AHP20

200L 0.8 MPa

4–6 member families, high-rise flats (6+ floors)

Floor-mounted. The 0.8 MPa pressure rating makes this ideal for buildings with high water pressure.

AHP30

300L 0.8 MPa

Large families, small commercial

Same pressure rating as AHP20. Better choice for 7–10 member families or small guest houses.

Why 0.8 MPa matters for Bangalore high-rises

Buildings above 5 floors typically have overhead tank pressure exceeding standard heat pump ratings. Havells AHP20/30 are specifically rated for 0.8 MPa — safe for buildings up to 8 storeys without a pressure reducing valve.

Which System is Right for You?

Use Case	Recommended Model	Hot Water/Day	Approx Cost (Installed)
2–3 member home	A.O. Smith HPW 80	80L	₹55,000–70,000
4–6 member home / apartment	Havells AHP20 or A.O. Smith HPI 50	150–200L	₹90,000–1,30,000
High-rise flat (6+ floors)	Havells AHP20 (0.8 MPa rated)	200L	₹1,05,000–1,20,000
Hostel / PG (50–100 people)	A.O. Smith HPA 120	450L	₹2,50,000–3,50,000
Hotel / Hospital (200+ people)	A.O. Smith CAHP-MC-19	19kW continuous	₹5,50,000–7,00,000
Industrial / Large hotel	A.O. Smith CAHP-HC-42/84	42–84kW continuous	Quote on request

Why Heat Pump over Electric Geyser in Bangalore?

Bangalore's year-round mild climate (15–35°C) means heat pumps operate at COP 3.5–4 in every season — even on cool winter mornings (15–18°C), the COP remains well above 3. This translates to a consistent 70–75% electricity saving compared to direct electric geysers.

Electric Geyser (200L/day)

Electricity/day: 3–4 kWh
Monthly cost: ₹2,400–3,200
Annual cost: ₹28,800–38,400
CO₂/year: ~700kg

Heat Pump (200L/day, COP 3.8)

Electricity/day: 0.8–1 kWh
Monthly cost: ₹600–800
Annual cost: ₹7,200–9,600
CO₂/year: ~185kg

Annual saving

₹19,000–29,000

Payback (Havells AHP20)

4–6 years

System life

10–15 years

Industrial and Commercial Projects

Pratham Solar has completed heat pump installations for a range of commercial and industrial customers across Bangalore:

Hotels and resorts (kitchen + bathroom hot water)

Hospitals and nursing homes (OT, ICU, ward hot water)

Hostels and PGs (common bathroom hot water)

Apartment complexes (centralised hot water system)

Manufacturing facilities (process hot water)

Swimming pools (heating to 28–32°C year-round)

For commercial projects, Pratham Solar provides: free site survey and heat load calculation, system design with redundancy for critical applications, complete installation including pipework and controls, annual maintenance contracts, and 24-hour support for hospital and hotel clients.

Where Heat Pumps Are Not Suitable

Pratham Solar believes in honest recommendations. Heat pumps are not right for every situation:

Ambient temperature below 7°C

Not applicable in Bangalore, but relevant for hill station properties (Ooty, Coorg, Kodaikanal). In these locations, a solar water heater or backup element is better suited.

Very confined spaces with no ventilation

Heat pumps need airflow — minimum 1m clearance on all sides. A closed utility room without openings is not suitable without ventilation modification.

Immediate hot water demand

Heat pumps have a warm-up period. They are designed for scheduled heating (e.g., heating at night, ready by morning) rather than instant-on demand. Most units include a backup electric element for emergency instant heating.

Frequently Asked Questions

Is a heat pump water heater worth it in Bangalore?

Yes — Bangalore's mild climate (20–35°C year-round) is ideal for heat pumps. COP stays at 3.5–4 throughout the year, meaning for every unit of electricity consumed, you get 3.5–4 units of thermal energy. Compared to Bangalore's BESCOM tariff of ₹7–9/unit for higher domestic slabs, the effective cost of hot water drops by 70–75%.

Which is better — A.O. Smith or Havells heat pump for a home in Bangalore?

Both are excellent. Havells AHP20/30 are rated to 0.8 MPa pressure — making them the better choice for high-rise buildings (above 5 floors) where water pressure is higher. A.O. Smith HPW 80 and HPI series have a wider capacity range starting at 80L, making them better suited for smaller households. Pratham Solar will recommend the right model after a site visit.

What is the installation process for a heat pump in Bangalore?

Site survey to assess space, water inlet/outlet, drain point, and electrical capacity. Installation typically takes 1 day for residential systems. The unit needs 240V single-phase power (15A), a water inlet connection, and a drain point for condensate. BESCOM connection upgrade is rarely needed as heat pumps draw less peak current than direct geysers.

Does A.O. Smith have a service centre near Bangalore?

Yes — A.O. Smith's India manufacturing plant is at Harohalli, Kanakapura (30km from Bangalore). Their service network in Bangalore is strong with multiple authorised service centres. Pratham Solar also provides post-installation service as an authorised installer.

Can a heat pump be used for an entire apartment complex centrally?

Yes — A.O. Smith's CAHP-MC and CAHP-HC series are designed precisely for this. A CAHP-HC-42 (42kW) can supply continuous hot water for 200–300 flats in a large apartment complex, replacing individual geysers in every flat. Pratham Solar has designed and installed centralised systems for apartment complexes in South Bangalore.